← All prompts

💬 Sample Feedback Email to a Supplier

Turns your rough notes on a product sample into a clear, polite email that tells the factory exactly what to fix, what to keep and what you need before mass production.

Sourcing & supplier verificationBeginner · Copy and use. No edits needed.FreePublished Nov 1, 2026
Tested on✓ Gemini✓ DeepSeekSee test log

The prompt

You help a small importer write sample feedback to an overseas factory. Many suppliers read English as a second language, so use short sentences, numbered points and no idioms.

My notes on the sample (messy is fine):
{{sample_notes}}

Product: {{product}}
Supplier contact name: {{contact_name}}
What I need next: {{next_step}}

Write:
1. A subject line that names the product and says "sample feedback".
2. A short thank-you opening (one sentence).
3. "Please keep" - things that are already correct, as a numbered list.
4. "Please change" - each problem as a numbered point with: what is wrong, what I want instead, and how I will check it (measurement, photo, test). Use only details from my notes; if a measurement or spec is missing, write [confirm spec] instead of inventing one.
5. "Before mass production" - what I need from them (revised sample, photos, updated quote, timeline) based on my next step.
6. A closing that asks them to reply with a date.

After the email, add a short checklist for me of anything in my notes that was too vague to send as-is.

Variables

Replace each {{name}} before you send the prompt.

VariableWhat to put inExample
{{sample_notes}}Your raw notes on the sample, in any order.logo print a bit blurry on the left side. color looks good, matches pantone. stitching on handle loose on 2 of 3 bags. zipper ok. bag is ~1cm shorter than spec. box packaging fine but no barcode sticker
{{product}}What the sample is.Canvas tote bag with zipper, printed logo
{{contact_name}}Your contact at the supplier.Lily
{{next_step}}What you want to happen next.One revised sample by courier, then I will place a 1,000 pc order

Example

INPUT
sample_notes: logo print a bit blurry on the left side. color looks good, matches pantone. stitching on handle loose on 2 of 3 bags. zipper ok. bag is ~1cm shorter than spec. box packaging fine but no barcode sticker
product: Canvas tote bag with zipper, printed logo
contact_name: Lily
next_step: One revised sample by courier, then I will place a 1,000 pc order
OUTPUT
**Subject:** Canvas Tote Bag with Zipper – Sample Feedback

Hi Lily,

Thank you for sending the canvas tote bag samples.

### Please keep
1. **Logo color:** The print color matches the Pantone reference correctly.
2. **Zipper:** The zipper works well and meets our quality standard.
3. **Box packaging:** The outer box packaging is good.

### Please change
1. **Logo print clarity:**
   * *What is wrong:* The print is blurry on the left side of the logo.
   * *What we want instead:* The entire logo must be sharp and clear on both sides.
   * *How we will check:* Visual check and clear photo comparison.

2. **Handle stitching:**
   * *What is wrong:* The stitching on the handles was loose on 2 of the 3 sample bags.
   * *What we want instead:* Tight, reinforced stitching on all bag handles.
   * *How we will check:* Visual inspection and a manual pull test.

3. **Bag height:**
   * *What is wrong:* The bag height is approximately 1cm shorter than the specification.
   * *What we want instead:* The bag must meet the exact height of [confirm spec].
   * *How we will check:* Tape measurement from top to bottom.

4. **Barcode label:**
   * *What is wrong:* There is no barcode sticker on the packaging.
   * *What we want instead:* Add the barcode sticker [confirm spec: barcode number/placement] to each package.
   * *How we will check:* Visual check and barcode scanner test.

### Before mass production
1. Please send **one revised sample** by courier for our final approval.
2. Please confirm the production timeline for this revised sample.
3. Once we approve the revised sample, we will place the order for 1,000 pieces.

Please reply to confirm these points and tell us the date you will ship the revised sample.

Best regards,  
[Your Name]

***

### Checklist for You Before…

Real, unedited output from a test run on Nov 1, 2026 · Gemini · model gemini-flash-latest.

Full output · Gemini (gemini-flash-latest)
**Subject:** Canvas Tote Bag with Zipper – Sample Feedback

Hi Lily,

Thank you for sending the canvas tote bag samples.

### Please keep
1. **Logo color:** The print color matches the Pantone reference correctly.
2. **Zipper:** The zipper works well and meets our quality standard.
3. **Box packaging:** The outer box packaging is good.

### Please change
1. **Logo print clarity:**
   * *What is wrong:* The print is blurry on the left side of the logo.
   * *What we want instead:* The entire logo must be sharp and clear on both sides.
   * *How we will check:* Visual check and clear photo comparison.

2. **Handle stitching:**
   * *What is wrong:* The stitching on the handles was loose on 2 of the 3 sample bags.
   * *What we want instead:* Tight, reinforced stitching on all bag handles.
   * *How we will check:* Visual inspection and a manual pull test.

3. **Bag height:**
   * *What is wrong:* The bag height is approximately 1cm shorter than the specification.
   * *What we want instead:* The bag must meet the exact height of [confirm spec].
   * *How we will check:* Tape measurement from top to bottom.

4. **Barcode label:**
   * *What is wrong:* There is no barcode sticker on the packaging.
   * *What we want instead:* Add the barcode sticker [confirm spec: barcode number/placement] to each package.
   * *How we will check:* Visual check and barcode scanner test.

### Before mass production
1. Please send **one revised sample** by courier for our final approval.
2. Please confirm the production timeline for this revised sample.
3. Once we approve the revised sample, we will place the order for 1,000 pieces.

Please reply to confirm these points and tell us the date you will ship the revised sample.

Best regards,  
[Your Name]

***

### Checklist for You Before Sending:
* **Bag Height:** Replace `[confirm spec]` with the exact target height in centimeters (e.g., "40 cm").
* **Barcode Information:** Replace `[confirm spec]` with the exact barcode file, number, dimensions, and where on the box it must be placed.
* **Photos:** Attach clear photos of the blurry logo, the loose stitching, and the measurement showing the missing 1cm so the factory can see the issues clearly.
Full output · DeepSeek (deepseek-flash)
Subject: Sample feedback – Canvas tote bag with zipper and printed logo

Dear Lily,

Thank you for sending the sample.

Please keep:
1. Color: The color looks good. It matches Pantone.
2. Zipper: The zipper is correct.
3. Box packaging: The box packaging quality is fine.

Please change:
1. Logo print
   - What is wrong: The logo print is a little blurry on the left side.
   - What I want: A clear logo print on the left side. Print standard: [confirm spec].
   - How I will check: I will check a photo and the revised sample.

2. Handle stitching
   - What is wrong: The handle stitching is loose on 2 of 3 bags.
   - What I want: No loose handle stitching. Stitch standard: [confirm spec].
   - How I will check: I will check all handles on the revised sample and review photos.

3. Bag length
   - What is wrong: The bag is about 1 cm shorter than spec.
   - What I want: The bag length must match [confirm spec].
   - How I will check: I will measure the bag length against [confirm spec].

4. Barcode sticker
   - What is wrong: The box packaging has no barcode sticker.
   - What I want: Add a barcode sticker to the box packaging. Barcode details: [confirm spec].
   - How I will check: I will review a photo of the box packaging and check the revised sample.

Before mass production:
1. Please send one revised sample by courier.
2. Please send photos of the logo print, handle stitching, and barcode sticker. Please send a photo of the bag length measurement.
3. Please send an updated quote for 1,000 pieces.
4. Please send a timeline for the revised sample and mass production.

After I approve the revised sample, I will place a 1,000 piece order.

Please reply with the date you will send the revised sample by courier.

Best regards,
[Your name]

Internal checklist – too vague to send as-is:
- Logo print: “a little blurry” needs a clear pass/fail standard and the exact left-side location.
- Handle stitching: “loose” needs a clear standard. Confirm which handle and stitch standard.
- Bag length: target measurement/spec is missing. Use [confirm spec].
- Barcode sticker: barcode content, size, and placement are missing. Use [confirm spec].
- Courier: confirm your shipping address and courier account, if needed.
- Reply date: no target date is in the notes.

How to use it

Works in ChatGPT, Claude, Gemini and DeepSeek. Paste your notes as they are; the prompt sorts them into keep, change and next steps.

Use it right after you unbox a sample, while the details are fresh. It won’t invent specs: anything you didn’t measure comes back marked [confirm spec] so you can fill it in before sending.

Test log

Date (UTC)ToolModelRunResultChecksTokens in / out
Nov 1, 2026Geminigemini-flash-latestTestPassed
3/3
  • ✓ non-empty output (2210 chars)
  • ✓ length usable (200–4000 words) (367 words)
  • ✓ no obvious api key leak
325 / 539
Nov 1, 2026DeepSeekdeepseek-flashTestPassed
3/3
  • ✓ non-empty output (2279 chars)
  • ✓ length usable (200–4000 words) (398 words)
  • ✓ no obvious api key leak
349 / 5,352

Each row is a real run recorded by our test runner. For each tool, the latest test run decides whether it appears under “Tested on”. Baseline runs do the same task with no skill installed and never count.