💬 Supplier Verification Question Set
Builds a tailored list of questions and document requests to send a new overseas supplier before you place a first order.
The prompt
You are a sourcing specialist helping a small importer vet a new supplier before the first order.
Supplier: {{supplier_name}}
Country: {{supplier_country}}
Product: {{product}}
Planned first order: {{order_size}}
Destination market: {{destination_market}}
Write a verification checklist I can send to this supplier. Group it under these headings:
1. Company identity and legal registration
2. Factory or trading company (and how to tell)
3. Production capacity and lead times for this order size
4. Quality control and inspection
5. Product compliance and certificates required in the destination market
6. Payment terms and bank account checks
7. Samples
For each heading, give 3 to 5 specific questions or document requests. After each one, add a short note in brackets on what a good answer looks like and which answer is a red flag.
Finish with the 3 checks I should do myself without relying on the supplier's word.
Do not invent certificate numbers, registration numbers or company facts. If something depends on the product category, say so.
Variables
Replace each {{name}} before you send the prompt.
| Variable | What to put in | Example |
|---|---|---|
{{supplier_name}} | The supplier's company name as it appears on their quote or website. | Ningbo Example Housewares Co., Ltd. |
{{supplier_country}} | Country where the supplier is registered. | China |
{{product}} | The product, with material and any key spec. | 304 stainless steel insulated water bottle, 500 ml |
{{order_size}} | Quantity and rough value of the first order. | 2,000 units, about US$6,000 |
{{destination_market}} | Where you will sell the product. This drives the compliance questions. | United States (sold on Amazon) |
Example
supplier_name: Ningbo Example Housewares Co., Ltd. supplier_country: China product: 304 stainless steel insulated water bottle, 500 ml order_size: 2,000 units, about US$6,000 destination_market: United States (sold on Amazon)
# Supplier Verification Checklist **To:** Ningbo Example Housewares Co., Ltd. **Product:** 500 ml insulated water bottle, specified as 304 stainless steel **Proposed first order:** 2,000 units, approximately US$6,000 **Destination:** United States; resale on Amazon Please provide the following information and documents before we confirm the order. Documents should identify the relevant legal entity, factory, product model, and materials. You may redact unrelated customer information, but please keep verification details visible. ## 1. Company identity and legal registration 1. **Please provide your current Chinese business license showing your registered Chinese name, Unified Social Credit Code, legal representative, registered address, and business scope.** [**Good:** Clear, current document with consistent details. **Red flag:** Refusal, illegible copy, or conflicting names or addresses.] 2. **Please confirm the legal entity that will sign the contract, issue the invoice, receive payment, and act as exporter. Explain any differences between these entities.** [**Good:** One consistent entity, or a documented and verifiable export-agent arrangement. **Red flag:** Unexplained third parties or entity changes.] 3. **Please provide your office and production addresses, company website, and the name and position of our authorized contact. Will you accept a live video call from these locations?** [**Good:** Verifiable locations and a contact authorized to negotiate. **Red flag:** Addresses cannot be explained or live verification is repeatedly avoided.] 4. **Please provide two recent overseas customer references, with their permission, preferably for comparable drinkware orders.** [**Good:** References we can contact independently. **Red…
Real, unedited output from a test run on Oct 18, 2026 · ChatGPT · model gpt-6.1-sol.
Full output · ChatGPT (gpt-6.1-sol)
# Supplier Verification Checklist **To:** Ningbo Example Housewares Co., Ltd. **Product:** 500 ml insulated water bottle, specified as 304 stainless steel **Proposed first order:** 2,000 units, approximately US$6,000 **Destination:** United States; resale on Amazon Please provide the following information and documents before we confirm the order. Documents should identify the relevant legal entity, factory, product model, and materials. You may redact unrelated customer information, but please keep verification details visible. ## 1. Company identity and legal registration 1. **Please provide your current Chinese business license showing your registered Chinese name, Unified Social Credit Code, legal representative, registered address, and business scope.** [**Good:** Clear, current document with consistent details. **Red flag:** Refusal, illegible copy, or conflicting names or addresses.] 2. **Please confirm the legal entity that will sign the contract, issue the invoice, receive payment, and act as exporter. Explain any differences between these entities.** [**Good:** One consistent entity, or a documented and verifiable export-agent arrangement. **Red flag:** Unexplained third parties or entity changes.] 3. **Please provide your office and production addresses, company website, and the name and position of our authorized contact. Will you accept a live video call from these locations?** [**Good:** Verifiable locations and a contact authorized to negotiate. **Red flag:** Addresses cannot be explained or live verification is repeatedly avoided.] 4. **Please provide two recent overseas customer references, with their permission, preferably for comparable drinkware orders.** [**Good:** References we can contact independently. **Red flag:** Fabricated or unverifiable contacts; confidentiality alone is not proof of a problem.] ## 2. Factory or trading company (and how to tell) 1. **Are you the manufacturer, a trading company, or both? If production is outsourced, identify the actual manufacturer and its address.** [**Good:** Clear disclosure of each party’s role. **Red flag:** Claiming factory ownership while refusing to identify the production site.] 2. **Which operations are performed in-house—forming, welding, vacuum insulation, polishing, coating, printing, and assembly—and which are subcontracted?** [**Good:** A credible process map identifying subcontractors’ roles. **Red flag:** Vague claims that everything is in-house without supporting evidence.] 3. **Will you permit a buyer-appointed factory visit or audit, including a live walkthrough of production, QC, and finished-goods storage?** [**Good:** Access to the actual factory under reasonable confidentiality rules. **Red flag:** Only showroom access or prerecorded footage.] 4. **Please explain your relationship with the factory and how you control material purchases, specifications, subcontracting, and corrective actions.** [**Good:** Documented authority and traceability, whether manufacturer or trader. **Red flag:** No ability to prevent substitutions or enforce corrections.] ## 3. Production capacity and lead times for this order size 1. **Please provide a schedule for our 2,000-unit order covering material procurement, production, decoration, inspection, packing, and shipment readiness.** [**Good:** Milestones tied to deposit and sample approval. **Red flag:** An unusually short promise without a supporting schedule.] 2. **What is your current output for this bottle model, and what capacity is available during our proposed production period?** [**Good:** Model-specific output supported by current production records. **Red flag:** Quoting total factory capacity unrelated to this product.] 3. **What minimum quantities or lead-time changes apply to our chosen color, logo, lid, and packaging? Identify all tooling or setup charges.** [**Good:** Written, itemized conditions and pricing. **Red flag:** Customization costs or minimums appear only after payment.] 4. **What could delay this order, and will you agree to written milestone updates and no factory or material substitutions without our approval?** [**Good:** Realistic risks and written change controls. **Red flag:** Unilateral substitution rights or no delay-notification process.] ## 4. Quality control and inspection 1. **Please provide the proposed specification sheet: dimensions, weight tolerances, food-contact materials, steel grade for each steel component, lid/gasket materials, finish, and insulation performance.** [**Good:** Measurable specifications distinguishing inner and outer walls. **Red flag:** “304 bottle” without component-level details.] 2. **Please provide your QC plan and sample records for incoming materials, welding, vacuum integrity, leakage, finish, and final assembly.** [**Good:** Defined methods, acceptance limits, and lot records. **Red flag:** Visual checks alone or no recorded results.] 3. **How do you verify 304 stainless steel and trace material batches to finished bottles? Please provide material certificates and explain any independent verification.** [**Good:** Traceable certificates supported by appropriate testing. **Red flag:** Magnet testing alone or unrelated material reports.] 4. **Will you accept independent pre-shipment inspection before balance payment, with agreed sampling, defect classifications, functional tests, and reinspection arrangements after failure?** [**Good:** Written acceptance of inspection access and remedies. **Red flag:** Inspection permitted only after full payment or shipment.] ## 5. Product compliance and certificates required in the destination market 1. **Please list every food-contact material—including lid, gasket, coatings, adhesives, and sealants—and provide the applicable U.S. FDA regulatory basis and supporting test reports for the intended use conditions.** [**Good:** Material-specific support addressing beverage type, temperature, and repeated use. **Red flag:** A generic “FDA certificate” presented as product approval; FDA generally does not approve or certify finished bottles.] 2. **Please provide complete laboratory reports matching this model and its materials, including sample identification, test methods, dates, results, and laboratory accreditation details.** [**Good:** Reports whose authenticity and relevant testing scope can be independently checked. **Red flag:** Cropped reports, unrelated models, or a CE mark offered as proof of U.S. compliance.] 3. **Please disclose the composition and location of any solder, vacuum-sealing material, pigments, or coatings, and provide relevant lead, cadmium, and other chemical test results. Has California Proposition 65 exposure been assessed if sales include California?** [**Good:** Component-specific evidence and an appropriate exposure assessment. **Red flag:** “Lead-free” without evidence or a claimed universal Proposition 65 certificate.] 4. **Is this model designed or marketed primarily for children aged 12 or younger? If so, provide the applicable children’s-product testing documentation and information needed for a Children’s Product Certificate and tracking labels.** [**Good:** Classification based on design and marketing; applicable testing from a CPSC-accepted laboratory. **Red flag:** Assuming children’s-product rules never apply to bottles. Requirements depend on classification; the U.S. importer generally issues the CPC.] 5. **Please provide proposed product and packaging labels, country-of-origin marking, warnings, care instructions, and any documents available for Amazon review. Identify evidence supporting “304,” “BPA-free,” and performance claims.** [**Good:** Accurate claims and labels consistent with the product and current requirements. **Red flag:** “Amazon approved” without a specific, verifiable basis; marketplace requirements can vary.] ## 6. Payment terms and bank account checks 1. **Please quote deposit and balance terms, currency, named Incoterm and location, and all excluded charges. Can the balance be payable after a passed independent inspection?** [**Good:** Clear total costs and meaningful payment leverage. **Red flag:** Pressure for full advance payment or unclear shipping responsibilities.] 2. **Please provide bank-issued account details showing the beneficiary’s legal name, bank, branch, account number, and SWIFT code.** [**Good:** Beneficiary matches the contracting entity. **Red flag:** Personal accounts or unexplained third-party beneficiaries.] 3. **If payment goes to a different entity, please provide the legal relationship and signed payment authorization for independent verification.** [**Good:** A transparent, verifiable arrangement. **Red flag:** “Our finance partner” without documentation.] 4. **Will you agree that bank-detail changes require formal written notice and verification through an already-established telephone contact? Please also confirm refund and defect-remedy terms in the contract.** [**Good:** Agreed anti-fraud controls and enforceable remedies. **Red flag:** Urgent email-only account changes or refusal to document remedies.] ## 7. Samples 1. **Please provide a sample made with the exact proposed production materials, lid, gasket, finish, logo, and packaging; identify any differences.** [**Good:** Production-representative sample with disclosed deviations. **Red flag:** A generic sample presented as an exact match.] 2. **What are the sample cost, delivery time, customization charges, and any credit against the order?** [**Good:** Written, itemized terms. **Red flag:** Repeated unexplained sample fees or changing commitments.] 3. **Will you agree to retain matching approved “golden samples” and incorporate the approved specification and sample reference into the purchase contract?** [**Good:** Identifiable retained samples plus written specifications. **Red flag:** No agreed reference for judging bulk quality.] 4. **Will you allow independent sample testing and later testing of randomly selected bulk-production units?** [**Good:** Both are permitted with traceable samples. **Red flag:** Only supplier-selected samples may be tested.] ## Three checks I will perform independently 1. **Verify legal identity and payment instructions.** Search China’s official National Enterprise Credit Information Publicity System using the Chinese legal name and credit code; check status and discrepancies. Confirm bank instructions through a separately verified contact, not just invoice email. 2. **Commission an independent factory check and pre-shipment inspection.** Confirm the actual production site, manufacturing capability, subcontracting, and bulk quality before releasing the balance. 3. **Independently verify compliance and test representative products.** Confirm reports directly with the issuing laboratory; use a qualified laboratory or U.S. compliance specialist to establish applicable testing and labeling requirements, and check current Amazon requirements in Seller Central.
Full output · DeepSeek (deepseek-flash)
Bracketed notes are for your internal use; remove them before sending if you want a clean supplier questionnaire. ## 1. Company identity and legal registration 1. Please provide your full legal name in Chinese and English, Unified Social Credit Code, business-license scan, registered address, legal representative, establishment date, and registered business scope. [Good: all details match the quotation/contract name and the license is current; red flag: name/address mismatch, expired license, or scope unrelated to housewares/export.] 2. Which exact legal entity will sign the contract, issue the invoice, and receive payment? [Good: same legal entity throughout; red flag: contract entity, invoice entity, and bank beneficiary are different without a clear explanation.] 3. Do you hold an export license/customs registration for this product, or how will the goods be exported? Please provide the relevant document if applicable. [Good: document provided or clear export arrangement; red flag: refusal to explain export status or request to use an unrelated company’s export rights.] 4. Please provide English translations of the business license/registration documents and confirm whether the registered address is an office, factory, or both. [Good: translated documents match original and address type is clear; red flag: only a PO box/office address with no factory explanation.] 5. Please confirm the company’s official website, phone number, and a contact person who can verify bank and contract details independently. [Good: verifiable public contact and named person; red flag: only free email/chat contact, no verifiable company phone or address.] ## 2. Factory or trading company (and how to tell) 1. Are you the manufacturer or a trading company? If you are a trading company, please identify the actual factory’s legal name, address, and your relationship with it. [Good: clear answer with factory name/address and relationship; red flag: vague “we have a factory” without legal identity.] 2. Please provide the factory’s business license, factory address, and recent photos/video showing exterior sign, production lines, warehouse, and QC area. [Good: factory documents and visuals are consistent with the quoted product; red flag: only office photos, stock internet images, or refusal to show production lines.] 3. Which production steps do you perform in-house: steel forming, vacuum insulation, polishing, lid/seal injection, printing/coating, assembly, final packing? [Good: specific list and clear explanation of any outsourced steps; red flag: cannot name processes or claims everything is in-house but cannot show it.] 4. Can we arrange a live video walk-through and/or a third-party factory audit at short notice? [Good: yes, with access to production and records; red flag: refuses audits, restricts video, or only offers a showroom call.] ## 3. Production capacity and lead times for this order size 1. Please confirm your MOQ for this 500 ml 304 stainless steel insulated bottle and whether 2,000 units is acceptable, including for any custom color/logo/packaging. [Good: 2,000 units is acceptable or clear MOQ conditions; red flag: quotes 2,000 but later invents much higher MOQ or tooling fees.] 2. What is your current monthly production capacity and current order backlog for this exact model? [Good: specific units/month and current load; red flag: vague “large capacity” or capacity below the order without disclosure.] 3. What is the lead time from deposit and approved sample/artwork to ex-factory, including production, QC, and packing? Please give milestones. [Good: specific calendar days and milestone schedule; red flag: unrealistic promise without current stock or refusal to commit in writing.] 4. Which production stages are in-house versus subcontracted, and how do you control quality at each stage? [Good: clear stage list and QC checkpoints; red flag: cannot explain where key steps happen.] 5. Can you handle Amazon FBA packaging/labeling requirements if we provide the spec, and can you provide a packing list/label preview before shipment? [Good: yes, understands FBA labeling and will follow written spec; red flag: no understanding of FBA or refuses pre-shipment label check.] ## 4. Quality control and inspection 1. Please provide your written QC plan for this SKU, including AQL levels for incoming material, in-process, and final inspection. [Good: documented QC plan with AQL/checkpoints; red flag: no written plan or only “we check 100% visually.”] 2. Which tests do you run per batch: leak test, thermal insulation performance, lid/seal fit, drop test, vacuum test, coating/printing adhesion, etc.? Please provide sample test records. [Good: product-specific tests with records; red flag: only visual inspection or cannot provide recent records.] 3. Will you allow a third-party pre-shipment inspection (e.g., SGS/BV/TUV or our agent), and what access do you give the inspector? [Good: yes, inspection allowed before packing/shipment; red flag: refuses third-party inspection or imposes unreasonable restrictions.] 4. What is your defect/claims policy, and how do you trace a defective unit back to the production batch? [Good: written policy and batch traceability; red flag: no policy, no batch records, or “no defects ever.”] 5. Can you retain inspection records and a production sample from our order for at least 12 months? [Good: yes, retained samples/records available; red flag: refuses retention or has no record system.] ## 5. Product compliance and certificates required in the destination market Some requirements depend on the product category and configuration—especially whether it is marketed to children, has plastic/coated/printed parts, or makes BPA-free/food-safe claims. Please answer specifically for this bottle. 1. Please list all materials contacting drinking water/liquid—bottle interior, lid, seal, straw if any, coatings/inks—and provide FDA food-contact compliance declarations and test reports from a qualified lab for each material. [Good: material-specific declaration/test reports with model, lab, date, and standard; red flag: generic “FDA approved” certificate with no product/model or test standard.] 2. Please provide the 304 stainless steel mill material certificate/test report showing grade and chemical composition, and confirm it applies to our production batch. [Good: MTR with 304 grade and traceability; red flag: no MTR or only “304 equivalent” claims.] 3. For California Proposition 65, please provide heavy-metal testing/statement for accessible components, especially any coating/printing, base/vacuum-seal area, and food-contact parts. [Good: specific lead/cadmium/heavy-metal test report and compliance statement; red flag: generic “Prop 65 compliant” letter with no testing or warning analysis.] 4. Does the vacuum-sealing process or base use any lead-containing solder/sealing material? Please disclose composition and provide a test report if present. [Good: lead-free or disclosed and supported by test data; red flag: “unknown,” refusal to answer, or no test data for the base/seal area.] 5. Is this product intended or marketed for children? If yes, provide CPSIA/CPSC compliance documentation, including lead/phthalates/tracking-label requirements as applicable. If no, confirm it is not marketed as a children’s product. Also provide the basis for any BPA-free claim if plastic parts are used. [Good: clear yes/no and documents if applicable; red flag: evasive answer, or sold as a kids’ bottle without CPSIA documentation.] ## 6. Payment terms and bank account checks 1. What are your standard payment terms for a first order of about US$6,000—deposit percentage, balance timing, and accepted payment methods? [Good: reasonable written terms tied to inspection/shipment; red flag: 100% upfront, only personal payment, or pressure for immediate transfer.] 2. Please provide the bank account beneficiary name, bank country/branch, and a bank account confirmation letter or bank statement header. The beneficiary must match the contracting legal entity. [Good: company account matching legal name; red flag: personal account, third-party account, or account in a different country/name.] 3. Will you accept that bank-detail changes are valid only by signed contract amendment and independent phone verification with your known company contact? [Good: agrees to independent verification; red flag: insists on email-only changes or last-minute bank-detail changes.] 4. Please confirm Incoterms, currency, who pays bank charges, and whether balance payment can be made after third-party pre-shipment inspection. [Good: clear Incoterms/currency and inspection-linked balance; red flag: vague terms or refuses inspection before balance.] ## 7. Samples 1. Can you provide both a stock sample and a pre-production sample made with final materials/process? What are the sample cost and lead time? [Good: both available with clear cost/lead time; red flag: only “similar” stock sample, no pre-production sample.] 2. Is the sample fee refundable or creditable against the bulk order? [Good: clear credit/refund policy; red flag: nonrefundable high fee with no explanation.] 3. Can you seal/mark one approved sample as the golden sample and retain a matching counter-sample? [Good: yes, golden sample process accepted; red flag: refuses or has no sample retention process.] 4. Can you provide the material certificates and test reports for the sample batch, and show sample retail packaging/FBA label mockup if required? [Good: sample-linked documents and packaging spec; red flag: sample cannot be tied to production materials or reports.] ## 3 checks you should do yourself without relying on the supplier’s word 1. **Verify the legal entity and bank beneficiary independently.** Check the business registration in the official Chinese enterprise registry or via a reputable verification agent, confirm status/scope/address, and cross-check the contract, invoice, and bank account name. Verify bank details by independent phone callback to a known company number or bank letter—not by email alone. 2. **Verify the factory and certificate authenticity independently.** Do a live video walk-through or third-party audit, check the factory address on maps, and verify ISO/test reports/certificates directly with the issuing body or lab. Confirm the certificate/report names the correct product/model and address. 3. **Test the sample and inspect the shipment independently.** Send a sample to an accredited lab for FDA food-contact, 304 stainless material, Prop 65 heavy metals, and CPSIA if applicable; verify the lab report directly with the lab. Then arrange third-party pre-shipment inspection before paying the balance.
How to use it
- Click Copy prompt and paste it into your AI chat.
- Replace every
{{variable}}with your own details. The table above shows what each one means. - Send it, then review the checklist before you forward it. Remove questions that do not fit your deal.
The prompt tells the model not to make up registration or certificate numbers. Still check every claim the supplier makes against official sources, such as the national business registry in the supplier’s country.
Test log
| Date (UTC) | Tool | Model | Run | Result | Checks | Tokens in / out |
|---|---|---|---|---|---|---|
| Oct 18, 2026 | DeepSeek | deepseek-flash | Test | Passed | 7/7
| 270 / 7,850 |
| Oct 18, 2026 | ChatGPT | gpt-6.1-sol | Test | Passed | 7/7
| 244 / 2,248 |
Each row is a real run recorded by our test runner. For each tool, the latest test run decides whether it appears under “Tested on”. Baseline runs do the same task with no skill installed and never count.